LG Dishwasher AE / EI Error Code
AE and EI on an LG dishwasher report leakage or overfilling. Causes include excess water, suds, an unlevel unit, or water in the Heat Dry blower.
Specialized LG Appliance Repair in San Francisco
Mon–Sat: 8:00 AM – 7:00 PM
When the LDNPQ44H leaves a film on glasses or stops with a message, begin with these checks and then send us the details.
The LDNPQ44H is an LG dishwasher. Think of it as a regular LG built-in: a tub with spray arms, a filter set at the bottom, a circulation pump, a drain pump and an inlet valve fed from the sink supply.
Cloudy glass, gritty plates and food stuck on the upper rack are the most common reports. Some come from the water and the detergent, others from a clogged filter or a spray arm with blocked holes. Our post on an upper rack that does not clean explains how to tell the difference.
Read it at upper rack not cleaning.
A circulation or pump message links to code nE. A heater message is at code HE. If the cabinet floor shows moisture, look at code FE for the leak related meaning.
A sour or musty smell usually comes from trapped food in the filter, the door gasket or a drain hose that holds water. Remove and rinse the filter, wipe the gasket and run an empty hot cycle with a dishwasher cleaner. If the smell stays, book a visit. Our guide on a smelly dishwasher is at dishwasher bad odor.
Book through LG dishwasher repair. The LG dishwashers overview lists more models, and you may compare with the LG LDPH676. We estimate in writing, and repair starts only with your approval.
A clear photo of the model label, a short description of when the issue started and a note about whether it happens on every cycle or only on long ones will make the first conversation much shorter. If you use a water softener or live in a building with a shared boiler, mention it, since water quality can change spotting and film patterns.
Also tell us if you recently changed detergent type, moved from powder to pods or loaded the racks differently. Those small changes explain a surprising share of wash complaints, and knowing them lets us focus on the parts that matter.
Not always. Check the amount of detergent, the filter and the spray arms first.
Usually on the inside edge of the door or the side of the tub.
Yes. Switch the unit off, lift the filter out, rinse it and set it back firmly.
Yes. Close the supply valve and turn off power at the breaker until we look at it.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.